Open Black Hole Vu+ Solo2 0.1

P

Pastilla

I installed the latest Openpli 4.0 and have the same problem. This is no problem Open Black Hole.

Thank you for your interest and goodbye.
 
N

Neblinio

oldgraf said:
I tested 2.1.6.1 - works fine on solo2. FTA and not FTA channels...
Will wait for updated OBH on solo2
Click to expand...
I have the same problem.
I did some tests disabling one tuner and then the other, and discovered tuner A is not working at all.

I hope the OBH team is aware of this issue and can fix it soon and easily.
Thanks!
 
O

oldgraf

Neblinio said:
I have the same problem.
I did some tests disabling one tuner and then the other, and discovered tuner A is not working at all.

I hope the OBH team is aware of this issue and can fix it soon and easily.
Thanks!
Click to expand...
Any news about this ?
 
M

micky

internal hdd will not initialize? on obh,
devices mountpoints manager, nothing showing for hdd,
cannot mount hdd?
any sugg?
 
N

nunigaia

micky said:
internal hdd will not initialize? on obh,
devices mountpoints manager, nothing showing for hdd,
cannot mount hdd?
any sugg?
Click to expand...

On your remote control press:

Menu -> Information -> About

and see if your HDD is detected by image

best regards
nunigaia
 
K

kalamari

oldgraf said:
Any news about this ?
Click to expand...

Hi,

that`s a old problem with (only) Solo2, caused a problem with file "NimManager.py" in Open PLi Image, which is the same as in Open Blackhole (in normal/old Blackhole Image there was an fix, which wasn`t accepted from Open PLi) ...

Solution:

1. Telnet: opkg install enigma2-src (then you can see the "NimManager.py" in /usr/lib/enigma2/python/Components)

2. Change the following part in "NimManager.py":

Code: 
def linkNIMs(self, sec, nim1, nim2):
  print "link tuner", nim1, "to tuner", nim2
  if nim2 == (nim1 - 1):
   self.linkInternally(nim1)
  sec.setTunerLinked(nim1, nim2)

to

Code: 
def linkNIMs(self, sec, nim1, nim2):
  print "link tuner", nim1, "to tuner", nim2
  self.linkInternally(nim1)
  sec.setTunerLinked(nim1, nim2)

The indentation (ie tabs or spaces at the beginning of a line) are very important. They must be exactly right. Otherwise it does not work.

3. Restart GUI

Ready ...

Regards
 
Last edited:
N

Neblinio

kalamari said:
Hi,

that`s a old problem with (only) Solo2, caused a problem with file "NimManager.py" in Open PLi Image, which is the same as in Open Blackhole (in normal/old Blackhole Image there was an fix, which wasn`t accepted from Open PLi) ...

Solution:

1. Telnet: opkg install enigma2-src (then you can see the "NimManager.py" in /usr/lib/enigma2/python/Components)

2. Change the following part in "NimManager.py":

Code: 
def linkNIMs(self, sec, nim1, nim2):
  print "link tuner", nim1, "to tuner", nim2
  if nim2 == (nim1 - 1):
   self.linkInternally(nim1)
  sec.setTunerLinked(nim1, nim2)

to

Code: 
def linkNIMs(self, sec, nim1, nim2):
  print "link tuner", nim1, "to tuner", nim2
  self.linkInternally(nim1)
  sec.setTunerLinked(nim1, nim2)

The indentation (ie tabs or spaces at the beginning of a line) are very important. They must be exactly right. Otherwise it does not work.

3. Restart GUI

Ready ...

Regards
Click to expand...
Thanks, it worked perfectly!
I saw enigma2-src can be uninstalled after doing the fix (but keeping the file NimManager.py).

Should we undo this fix before doing any online update?
Will this fix cause any conflict when BH team finally fixes this bug?
 
S

Shiro

kalamari said:
Hi,
that`s a old problem with (only) Solo2, caused a problem with file "NimManager.py" in Open PLi Image, which is the same as in Open Blackhole (in normal/old Blackhole Image there was an fix, which wasn`t accepted from Open PLi) ...
Solution:
Click to expand...

Patch applyed to OpenBlackHole git.
 
C

cargen

Having a strange problem. If I do a firmware upgrade via gui. The system won't reboot. I need to reboot it via terminal/ssh
 
E

Eragon

cargen said:
Having a strange problem. If I do a firmware upgrade via gui. The system won't reboot. I need to reboot it via terminal/ssh
Click to expand...
I suspect that also the menu option for full reboot or deep standby won't work any longer...Is that true?
 
C

cargen

Eragon said:
I suspect that also the menu option for full reboot or deep standby won't work any longer...Is that true?
Click to expand...
After upgrade is completed and I reboot from terminal. I can reboot from the menu option without any problem. The problem appear only when I do a firmware upgrade from the gui.
 
N

nunigaia

cargen said:
After upgrade is completed and I reboot from terminal. I can reboot from the menu option without any problem. The problem appear only when I do a firmware upgrade from the gui.
Click to expand...

Have you used open multiboot, on your USB PEN DRIVE?
 
You must log in or register to reply here.
Top