Issue with Multiboot

A

amine2010

Active member
Hi guys.
I need your help. I have 4 images installed on my Uno 4k se (4 slots). When I upgraded an image in slot 3, it got stuck. I tried to reset it via telnet but to no avail. Is there any way to delete this image or reboot the recovery image without losing all the images as I had to reflash the box.
Thanks.
 
Just boot 1 of the other slots that work, then reflash slot 3
 
Thank you for your reply,
I need to know how to boot from slot 1, as when I reboot the box manually it gets stuck on the same slot.
 
put a blank file named STARTUP_RECOVERY onto a usb stick (if you have ftp access, then you can upload it to the usb / hdd already on your box), otherwise use a fat32 formatted usb stick and connect that to the box, power it off and back on again and it will boot to recovery image.

Then remove the usb (or STARTUP_RECOVERY file) from the location you put it, and select slot 1 to boot.
 
You must log in or register to reply here.
Back
Top