Need help with tuner config toroidal dish with 8 lnb

  • Thread starter Thread starter BadBlake
  • Start date Start date
B

BadBlake

My satbox is a Vu+ Duo2 with 2 twin tuners.
I just bought a used Wavefront toroidal dish with 8 lnb's and a EMP Centauri diseqc 1.1 switch for 8 lnb. Setting up the dish is easy enough but need help with tuner configuration. Can somebody give me a walkthrough on how to configure 8 lnb's?
 
BadBlake said:
My satbox is a Vu+ Duo2 with 2 twin tuners.
I just bought a used Wavefront toroidal dish with 8 lnb's and a EMP Centauri diseqc 1.1 switch for 8 lnb. Setting up the dish is easy enough but need help with tuner configuration. Can somebody give me a walkthrough on how to configure 8 lnb's?
Click to expand...

Try configure it in advanced mode!

LNB1 - Input1
LNB2 - Input2
.....
LNB8 - Input8

1.jpg

best regards
nunigaia
 
...and, obviously, choose each of your tuners for each LNB.
I suppose your LNBs have got only one output and that's why you mentioned to have only one switch.

Otherwise, if your LNBs have two OUTputs and you've got 2 switches, configure the tuner B exactly the same way you did for tuner A.
If your LNBs have only one output, the second tuner remains unused.
 
Alexwilmac said:
...and, obviously, choose each of your tuners for each LNB.
I suppose your LNBs have got only one output and that's why you mentioned to have only one switch.

Otherwise, if your LNBs have two OUTputs and you've got 2 switches, configure the tuner B exactly the same way you did for tuner A.
If your LNBs have only one output, the second tuner remains unused.
Click to expand...

If I had a twin lnb and both connected to 1 diseqc, would I be able to record from 1 lnb and at the same time watch live from the same satellite? Or would I need 2 switches? Hope I made myself clear :)
 
If I remember well, I tried once such an odd thing. ;) And, yes, I think it worked.
But the usual situation is to have two switches, one for each tuner. Even because, your way, you need to sacrifice one satellite to assign its input of your switch to the other satellite equipped with a LNB with these 2 OUTs you hypothesize.
And, finally, if you had 8 LNBs each one with 2 outputs, you'd need 16 cables (along with 2 switches, of course) to fully take advantage of your two tuners.
 
You must log in or register to reply here.
Back
Top