D
daneelolivaw
Hello,
I'm triyng to find Service App, maybe I'm blind, but I cannot find it.
Menu>Setup>System
I'm triyng to find Service App, maybe I'm blind, but I cannot find it.
Menu>Setup>System
M
Mick12334
Have you checked the plugins, and looked in the various download options?
D
daneelolivaw
Nope, later I'll check.
I'll be right back.
Tks
I'll be right back.
Tks
T
Thomas67
You need to install the plugin first.
Open Pluginbrowser and download from the feeds>>systemplugin>>serviceapp
Open Pluginbrowser and download from the feeds>>systemplugin>>serviceapp
D
daneelolivaw
I thought was embedded, my vu+duo don't has a lot of space in Flash. 
M
Mick12334
Which is why you extend your flash using a USB stick.
Haven't you read any of the guides?
https://www.vuplus-community.net/board/forums/black-hole-howto-guides.93/
Haven't you read any of the guides?
https://www.vuplus-community.net/board/forums/black-hole-howto-guides.93/
A
Alexwilmac
You must accept my advice of the other thread: is really not recommended to run current images for obsolete models like yours from flash.
Install it in OMB
Install it in OMB
D
daneelolivaw
Yep, but at the moment I'm doing just some tests.
First of all I have to fix the DTT USB stick!
If is'nt possible to fix it, I'll downgrade Vu+ to earlier BH.
First of all I have to fix the DTT USB stick!
If is'nt possible to fix it, I'll downgrade Vu+ to earlier BH.
Last edited:
D
daneelolivaw
I took your advice, installed a different image on HDD and now Vu+ is stuck in "Starting ..."You must accept my advice of the other thread: is really not recommended to run current images for obsolete models like yours from flash.
Install it in OMB
I reflash
A
Alexwilmac
If you reflash you obtain nothing more than booting and choosing the image in flash instead of the one in OMB.
Images can be easily removed by the OMB plugin itself.
Is your HDD formatted as ext4? I hope so.
Images can be easily removed by the OMB plugin itself.
Is your HDD formatted as ext4? I hope so.
D
daneelolivaw
There was no way to exit from ">Starting ..." not even via telnet.
M
Mick12334
Did your image installation complete, so that you finished the basic settings?
When flashing an image you wipe out all your settings, including your channel list, so when you boot up you are left on the splash screen, but you can access the menu, to scan in channels, or use dreamboxedit, from your PC, to load a channel list.
If the receiver really was frozen you can hold down the power button, for around 10 seconds, to force a re-boot.
When flashing an image you wipe out all your settings, including your channel list, so when you boot up you are left on the splash screen, but you can access the menu, to scan in channels, or use dreamboxedit, from your PC, to load a channel list.
If the receiver really was frozen you can hold down the power button, for around 10 seconds, to force a re-boot.
D
daneelolivaw
Hi Mick,
Installation was complete, but at the reboot after the choice in the openmultiboot, Vu+ stuck in booting ">Starting ..."
Installation was complete, but at the reboot after the choice in the openmultiboot, Vu+ stuck in booting ">Starting ..."
M
Mick12334
Why are you running open multiboot?
I thought you'd flashed Open Black Hole as your only image.
I thought you'd flashed Open Black Hole as your only image.
A
Alexwilmac
Because Solo, as well as other obsolete models, suffers a lot running an image from flash. And it's difficult to install plugins or else because the lack of space in flash.
D
daneelolivaw
I recently installed an old image (2013) and seems to work very well.