T
tplufc
Help needed. If I install OBH then I'm unanble to connect to the internet, if I try lan or wifi. If I use normal black hole internet connects with no issues. Is there something simple Im missing
B
bogdanm
Setup in network setup DHCP he find IP and coneckt to your router.
N
Neofita sat
Same problem with my new brand Duo2. I tried to install OBH but I decided to return to BlackHole because of the impossibility to connect the box to internet. I testes in a lot of way (DHCP or Static IP as i use normally...) but I did' t found the solution.
M
Mick12334
I'm running Open Blackhole and have no problem, with my Duo2, connecting to the internet, using an ethernet cable.
Are you trying to connect using WLAN, or LAN?
What happens, during the installation process, when it tries to connect to the internet?
Are you trying to connect using WLAN, or LAN?
What happens, during the installation process, when it tries to connect to the internet?
N
nunigaia
1) Follow this instructions:
Press <MENU>; <SETUP>; <NETWORK>; <DEVICE>; <WIRELESS LAN>;
2) Press <OK> to edit settings:
2) Define your Settings ( take a look to the sample ):
As primary DNS ...... define: 8.8.8.8
As secondary DNS .. define: 8.8.4.4
These are the google DNS. After enter both DNS ... press <OK> to save settings.
best regards
nunigaia
B
bogdanm
Like write my friend nunigaia somethimes
Primary DNS ......
Secondary DNS ..
Is no detected automatickly by image manualy add fix alot problems
Primary DNS ......
Secondary DNS ..
Is no detected automatickly by image manualy add fix alot problems
N
Neofita sat
Thank you Nunigaia & Bogdanm. During my attempts I done like yours pictures, and I changed the DNS primary and secondary (by adding the 2nd one), but the connection doesn' t start..
I normally use the same configuration with the BH images, I flashed a lot of time my 3 Vu+ boxes (Duo2, Ultimo and Zero)....I don' t understand where' s the problem.
Next week I will return on OBH, I hope with better results...
I normally use the same configuration with the BH images, I flashed a lot of time my 3 Vu+ boxes (Duo2, Ultimo and Zero)....I don' t understand where' s the problem.
Next week I will return on OBH, I hope with better results...
T
tplufc
Hi Thanks, I to have tried to alter the settings, still no luck., during the installation process it just says failed to setup try again. Eventually the box shows that its receiving an IP address from the router however it still will not connect. Its the same if or try wifi or lan.
A
amila perera
Just try add
primary dns 192. 168. 1. 1
Nothing in secondary dns and restart network
primary dns 192. 168. 1. 1
Nothing in secondary dns and restart network
T
tplufc
Hi, still no luck. Had tried all the options above. When i click on adapter settings its shows the box has an IP address, however the network test says unconfirmed IP address and I still no connection. Im lost
M
Mick12334
Have you tried the DCC, Dreambox Control Centre?
This finds everything connected to your network.
http://www.vuplus-community.net/board/threads/dcc-e2-v1-41.3147/
Start up the DCC_E2 exe file, under dreambox click Suchen, and in the pop up box start the Suche.
Please post back with anything it finds.
This finds everything connected to your network.
http://www.vuplus-community.net/board/threads/dcc-e2-v1-41.3147/
Start up the DCC_E2 exe file, under dreambox click Suchen, and in the pop up box start the Suche.
Please post back with anything it finds.
B
bogdanm
You try diable all antywir/firewall/iptable ?
Maybe some from him block conection
A
amila perera
Vu + duo2
Flash image- classic black hole
OpenMultiboot - open Blackhole
In flash image wifi works great but in open multiboot image (open Blackhole )wifi doesn't work
I also have problem with activating internal wifi .when I try to scan for wi fi network it hangs indefinitely.
When I check for box info for webinf only lan interface is listed.
Flash image- classic black hole
OpenMultiboot - open Blackhole
In flash image wifi works great but in open multiboot image (open Blackhole )wifi doesn't work
I also have problem with activating internal wifi .when I try to scan for wi fi network it hangs indefinitely.
When I check for box info for webinf only lan interface is listed.
T
the_lion_97
Same problem for me...
A
amila perera
Yes could
Yes could not scan for wireless networks. It hangs indefinitely when select scan. Even webif not show wln(0) only lan interface is listed. Image in flash lists both interfaces
T
the_lion_97
Hi, did you find any solution?
I tried also with OpenBH 4.01 but same problem, in flash with BH 3.0.4 no problems, it works fine.
Let me know, regards
A
Alexwilmac
What does it mean: "in flash with BH 304"? What image is in flash and what is in OMB?
T
the_lion_97
Obviously i have BH 3.04 in flash as a principal image, and OBH 4.01 in Openmultiboot.
In flash Wi-Fi works and scans networks, in omb no.
I think the guy above with my same problem has also got the same configuration...
(My english may be not correct, sorry)
M
Mick12334
Have you tried the Network Wizard and Manual Configuration option?
T
the_lion_97
Yes, but in wizard i got the same problem and in manual i cant select my network, and the dongle remains inactive