Tuner configuration vu+ uno4kse

[Lupusz]

I'm using the Unicable matrix "DUR-line DCS 552-16" with a direct connection to the vu+ uno4kse with 2x DVB-S/S2. The cable is connected to the left connector seen from the back.
It is impossible to connect the tuners cascaded like: A, B-> A, C->B, D->C, ... as shown in some configuration guides, because the GUI doesn't allow me to do so.
I had the cascaded config running for years with other images.
With the openBH 5.1 I can only choose to connect all tuners to tuner A or B, also for the FBC virtual tuners.

Basically I wouldn't care about all the details, but none of the configurations I tried are working.
The Maximum I achieved is that I connected Tuner B with Tuner A, so I have 2 tuners running.

Back to the problem:
C to G is not working at all. E.g. if I use the tuner C connected to A and B doesn't work.

I then tryed to manually configure it in the cascaded mode A, B-> A, C->B, D->C, ... but enigma2 crashed.

Here is the current config where all tuners are connected to tuner 0 (Tuner A).
With this config I have at least tuner A and B working, but the virtual tuners are not.

config.Nims.0.advanced.lnb.1.format=jess
config.Nims.0.advanced.lnb.1.lof=unicable
config.Nims.0.advanced.lnb.1.scrfrequency=975
config.Nims.0.advanced.lnb.1.scrList=1
config.Nims.0.advanced.lnb.1.unicable=unicable_user
config.Nims.0.advanced.sat.192.lnb=1
config.Nims.0.configMode=advanced
config.Nims.1.advanced.lnb.1.format=jess
config.Nims.1.advanced.lnb.1.lof=unicable
config.Nims.1.advanced.lnb.1.scrfrequency=1025
config.Nims.1.advanced.lnb.1.scrList=2
config.Nims.1.advanced.sat.192.lnb=1
config.Nims.1.advanced.unicableconnected=True
config.Nims.1.advanced.unicableconnectedTo=0
config.Nims.1.configMode=advanced
config.Nims.2.advanced.lnb.1.format=jess
config.Nims.2.advanced.lnb.1.lof=unicable
config.Nims.2.advanced.lnb.1.scrfrequency=1075
config.Nims.2.advanced.lnb.1.scrList=3
config.Nims.2.advanced.sat.192.lnb=1
config.Nims.2.advanced.sats=192
config.Nims.2.advanced.unicableconnected=True
config.Nims.2.advanced.unicableconnectedTo=0
config.Nims.2.configMode=advanced
config.Nims.3.advanced.lnb.1.format=jess
config.Nims.3.advanced.lnb.1.lof=unicable
config.Nims.3.advanced.lnb.1.scrfrequency=1125
config.Nims.3.advanced.lnb.1.scrList=4
config.Nims.3.advanced.sat.192.lnb=1
config.Nims.3.advanced.sats=192
config.Nims.3.advanced.unicableconnected=True
config.Nims.3.advanced.unicableconnectedTo=0
config.Nims.3.configMode=advanced
config.Nims.4.advanced.lnb.1.format=jess
config.Nims.4.advanced.lnb.1.lof=unicable
config.Nims.4.advanced.lnb.1.scrfrequency=1175
config.Nims.4.advanced.lnb.1.scrList=5
config.Nims.4.advanced.sat.194.lnb=1
config.Nims.4.advanced.sats=194
config.Nims.4.advanced.unicableconnected=True
config.Nims.4.advanced.unicableconnectedTo=0
config.Nims.4.configMode=advanced
config.Nims.5.advanced.lnb.1.format=jess
config.Nims.5.advanced.lnb.1.lof=unicable
config.Nims.5.advanced.lnb.1.scrfrequency=1225
config.Nims.5.advanced.lnb.1.scrList=6
config.Nims.5.advanced.sat.194.lnb=1
config.Nims.5.advanced.sats=194
config.Nims.5.advanced.unicableconnected=True
config.Nims.5.advanced.unicableconnectedTo=0
config.Nims.5.configMode=advanced
config.Nims.6.advanced.lnb.1.format=jess
config.Nims.6.advanced.lnb.1.lof=unicable
config.Nims.6.advanced.lnb.1.scrfrequency=1275
config.Nims.6.advanced.lnb.1.scrList=7
config.Nims.6.advanced.sat.194.lnb=1
config.Nims.6.advanced.sats=194
config.Nims.6.advanced.unicableconnected=True
config.Nims.6.advanced.unicableconnectedTo=0
config.Nims.6.configMode=advanced
config.Nims.7.advanced.lnb.1.format=jess
config.Nims.7.advanced.lnb.1.lof=unicable
config.Nims.7.advanced.lnb.1.scrfrequency=1325
config.Nims.7.advanced.lnb.1.scrList=8
config.Nims.7.advanced.sat.194.lnb=1
config.Nims.7.advanced.sats=194
config.Nims.7.advanced.unicableconnected=True
config.Nims.7.advanced.unicableconnectedTo=0
config.Nims.7.configMode=advanced
Click to expand...

Could someone please help me to find the right tuner configuration for the vu+ uno4kSE wit 2x DVB-S/S2 and openBH 5.1?

Cheers,
Lupusz

 

[luca]

per i tuner virtuali prova questo

 

[Lupusz]

I still have the problem with the tuners of my vuuno4kse boxes and Unicable configuration.
Is there really nobody out there who has the same problem or have solved the issue?

I have the same problem with OpenBH 5.3.

BR,
Lupus