Quad4K Pro Recovery Menu

Ev0

Ev0

Admin
Staff member
Administrator
To enter the Recovery Menu on the Quad 4K Pro, you need to power off the box and then power it back on whilst pressing and holding the power button on the front of the box.

The LCD will show Setup in 3, 2, 1 ... keep holding until it shows you an ip address.

Enter the IP address displayed into your web browser, you will then see the following:

1.png

Here you can select which boot slot you want to update.

Slot 1 is highlighted.

If you click on device information you will see the following:

2.png

If you press back, you will see the previous page.

From there you can select to upload an image (zip file) from your desktop:

3.png

Note the option to update the Splash screen can be done from here too, it is not selected by default, so you need to tick the box if you want to update it.

Instead of uploading an image to the box, you can also choose the download image option from the 1st screen:

4.png

Once you have selected an image from the selection box, click the download button.

5.png

When the download has completed you will see:

6.png

From here, you just select the slot you want to flash with the downloaded image and it will flash that slot.

If you change your mind and want to exit.

Go back to the 1st page and then at the bottom:

1.png

Click the reboot text:

7.png
 
hi
i tried not work with me got message loading setup instead of Ip address
 

Attachments

  • 8686deb4.jpg
    8686deb4.jpg
    35.5 KB · Views: 8
You need to keep holding the power button on the front, whilst it powers up
 
i hold the power button too much time nothing happens same message and i have problem with cable network only wifi is working
since i change it to wifi
 
I have seen on other boards, some have suggested removing all usb and hdd's before trying to get into recovery.
 
Descrivo la storia
Ho installato tutte le imagini disponibili per il decoder
Team Blue
Openatv 7.5
Openatv 7.6
Egami 10.6
Openvix 6.7
OpenBH 5.5
Openspa8.4
Poi ho dovuto fare aggiornamento Bolt 2448 perché non avevo accesso a tutte le immagini.
Dopo provando opespa ho deciso di aggiornare che non so in che modo a modificato bootloader che prima era teamblue diventando openspa.
Dopo riavvio tutte gli altre immagini installate sono sparite e quella che era rimasta era openspa che a modificato anche bootloader da Team Blue a openspa.
VIsta la situazione ho fatto quello che sapevo già da dreambox tramite ripristino o reinstallato Team Blue collegandomi tramite telefono al decoder usando indirizzo IP ma bootloader e rimasto sempre onspa come nella foto presentata.
Dreambox aveva anche la possibilità di ritornare a Immagine iniziale di Fabrica
Credo che sarebbe interessante di trovare una cosa simile anche per GIGABLUEQUADUHD4KPRO.
Grazie mille !!!
 
La risposta potrebbe essere qui ma devo sapere quale delle opzioni confermare.
 

Attachments

  • 3.png
    3.png
    522.6 KB · Views: 3
3.png
Note the option to update the Splash screen can be done from here too, it is not selected by default, so you need to tick the box if you want to update it.
 
You must log in or register to reply here.
Back
Top