Recording does not work with Unicable.

After reflash, receiver B appeared.
Still problems when making a recording and watching a channel that is on the same transponder.
I have version 5.5.1.001.
Maybe I should update to 5.5.1.011?
 
Shouldn't OpenBh choose a different receiver than the one you're recording on
even if the recording and the channel you're watching are on the same transponder?
If they are on different transponders, a different receiver is chosen and then there will be no problems.
 
Akita said:
Shouldn't OpenBh choose a different receiver than the one you're recording on
even if the recording and the channel you're watching are on the same transponder?
If they are on different transponders, a different receiver is chosen and then there will be no problems.
Click to expand...
Why ?

Even a universal lnb can record and watch different channels on the same transponder, so why should unicable be any different ?
 
It might depend on which channels you're viewing, if FTA, then I can't understand a problem, if using a subscription card then recording/viewing numerous channels might be a problem as newer cards might have limits, as a security against card sharing, or even using a second receiver, at home.
 
No, you can force an update using Telnet.
Using your PC either open the Dreambox Control Centre, and select Telnet, or use a program like PuTTY.
Once you've connected to Telnet type in root, press return, then enter your receivers password.
Once logged in the type the following command:
init 4 && opkg update && opkg upgrade && init 6
 
Mick12334 said:
No, you can force an update using Telnet.
Using your PC either open the Dreambox Control Centre, and select Telnet, or use a program like PuTTY.
Once you've connected to Telnet type in root, press return, then enter your receivers password.
Once logged in the type the following command:
init 4 && opkg update && opkg upgrade && init 6
Click to expand...
Thanks!
Now it was upgraded to 5.5.1.011.
 
It still doesn't work properly.
If I record a channel that I'm watching, I can then switch to another channel on the same transponder. OK.
If I then switch to another transponder and change the previous one that I'm recording on, an error occurs.
Now to what I can do to go back to the channels that are having problems.
I select another transponder and then press Stand By. Starts Vu+ and can then choose to watch the channels that weren't working before.
Can someone explain?
 
Have now tested other software and they behave the same way.
The first microwave head that I bought was
GT-Sat GT S3dCSS which did not work at all.
Black box all the time.
Bought DUR-line UK 124-3L which worked immediately and with good SNR approx. 83%.
Could it be the microwave head that is not behaving as it should?
Does anyone have a microwave head that does not behave as I have described earlier.
Which microwave head should I buy.
It should have a Unicable and 3 standard LNBs.

Can also mention that OpenBh is clearly the software that is easier to install and has more pedagogical menus.
 
You must log in or register to reply here.
Back
Top