Recording does not work with Unicable.

After reflash, receiver B appeared.
Still problems when making a recording and watching a channel that is on the same transponder.
I have version 5.5.1.001.
Maybe I should update to 5.5.1.011?
 
Shouldn't OpenBh choose a different receiver than the one you're recording on
even if the recording and the channel you're watching are on the same transponder?
If they are on different transponders, a different receiver is chosen and then there will be no problems.
 
Akita said:
Shouldn't OpenBh choose a different receiver than the one you're recording on
even if the recording and the channel you're watching are on the same transponder?
If they are on different transponders, a different receiver is chosen and then there will be no problems.
Click to expand...
Why ?

Even a universal lnb can record and watch different channels on the same transponder, so why should unicable be any different ?
 
It might depend on which channels you're viewing, if FTA, then I can't understand a problem, if using a subscription card then recording/viewing numerous channels might be a problem as newer cards might have limits, as a security against card sharing, or even using a second receiver, at home.
 
No, you can force an update using Telnet.
Using your PC either open the Dreambox Control Centre, and select Telnet, or use a program like PuTTY.
Once you've connected to Telnet type in root, press return, then enter your receivers password.
Once logged in the type the following command:
init 4 && opkg update && opkg upgrade && init 6
 
Mick12334 said:
No, you can force an update using Telnet.
Using your PC either open the Dreambox Control Centre, and select Telnet, or use a program like PuTTY.
Once you've connected to Telnet type in root, press return, then enter your receivers password.
Once logged in the type the following command:
init 4 && opkg update && opkg upgrade && init 6
Click to expand...
Thanks!
Now it was upgraded to 5.5.1.011.
 
It still doesn't work properly.
If I record a channel that I'm watching, I can then switch to another channel on the same transponder. OK.
If I then switch to another transponder and change the previous one that I'm recording on, an error occurs.
Now to what I can do to go back to the channels that are having problems.
I select another transponder and then press Stand By. Starts Vu+ and can then choose to watch the channels that weren't working before.
Can someone explain?
 
You must log in or register to reply here.
Back
Top