Search results

SNR 84%

Could it be that OpenBh 5.5.1 cannot handle recording and watching channels that are on the same transponder?

I have now made Unicable work to watch different channels. What does not work is recording. If I record a channel at the same time and want to watch the channel, the picture chops. If I record a channel at the same time as I want to watch another channel on the same transponder, the picture...

Very important! There are reported issues with OpenBH and SCR (Unicable) compatibility on VU+ Duo 4K SE, especially in versions from OpenBH 4.2.022 and later. Users have noticed that when a recording is started on a Universal LNB (e.g. LNB2 or LNB3) while the same tuner is used to watch a...

After fine-tuning the microwave head and dish direction, I got the SNR up to about 81% in cloudy weather.

I have now acquired a new microwave head. DUR-Line UK 124-3L and it worked straight away. How strong is the SNR usually? I get between 70%-75%. Maybe I need to change to a different satellite dish? Is quite old 90 cm but otherwise no damage that I can see. Recommendation for a good satellite...

Now I'm tired of all the errors with the connection with the microwave head GT-SAT model GT-S3DCSS24. Works one day and the next day there is no signal. Must be something wrong with the microwave head. Could this microwave head be a good alternative? Dur-line uk 124-3l dcss

Have placed the box separately. Same problem. Can the receiver work poorly with different SCR microwave heads. What I have works sometimes and then loses the signal completely. LNB works with good signal strength.

Thanks for the tip. Heat might be an explanation. Now it's on top of another receiver that heats. I'm moving so maybe the problem will be solved.

Tried again today. Now it works. Can a microwave head work this way. Works for a while and then no picture, turned off until the next day and works again.

Signal quality when it worked 75% SCR? Have you changed the LNB tilt, rotation? No. Is the dish correctly adjusted? Yes Works perfectly with LNB setup. When I connected the microwave head for the 1st time, SCR worked for a while. Thought it was due to a bad cable. Bought a new antenna cable...

Now it has happened again with the new cable that I got to work with. No signal from the satellite. Black box. Can a microwave head work sometimes and then stop working and work again then stop working etc.

No. No channels are , Free To Air. The dish is aimed at 0.8W and uses Allente as a distributor. Now the Vu+ is equipped with two physical tuners so I will test with a splitter so I can use A and B as separate tuners.

That is how I did it.

All tuners A-H have different userband frequencies. Then no collisions should occur and recording should work for several channels at the same time.

Alla A-H mottagare har olika användarbandsfrekvenser. Då ska inga kollisioner uppstå och inspelningen ska fungera för flera kanaler samtidigt.

Now the hockey world cup is being played and then two matches are being played at the same time. That is the reason why I record several channels at the same time. What is the reason why there are several tuners if I cannot use them at the same time? Now that I have VU+ duo 4k se with...

When connected with SCR(Unicable/JESS) recording of several channels should work fine. It doesn't work that way for me. Interference in the picture when I watch one channel and record several other channels at the same time. Saw that the setting for the satellite channel has been changed as the...

I have also noticed that when starting Vu+ there may be a black box. No SNR is displayed. If I change to another channel the picture comes. Then I can go back to the previous channel. I have never had this when I used select LNBs.

I have tuner A connected and tuner B not connected. Then I have connected receivers C-H. Will it be better if I connect B as well. Is it possible to use a slitter? One input to two outputs. A splitter probably changes the SNR strength. As it is now, Signal finder shows about 73%.