Recording and watching another channel with SCR(Unicable/JESS)

Akita

Active member
When connected with SCR(Unicable/JESS) recording of several channels should work fine.
It doesn't work that way for me.
Interference in the picture when I watch one channel and record several other channels at the same time.
Saw that the setting for the satellite channel has been changed as the picture shows I had not set it before.
Should it be "Predefined transponder"???
 

Attachments

  • Sat-pos.jpg
    Sat-pos.jpg
    53.7 KB · Views: 7
What's the use of recording several channels at the same time? Are you doing it just for testing? Days are only 24hrs ;-)
Each action takes resources and they're not unlimited in our STBs.
 
It doesn't matter if you scan as predefined, (Already listed, in your satellite.xml), or manually set the transponder details, providing the satellites.xml is upto date.

You need to set up your virtual tuners, using the advanced tuner option, otherwise you can only record/view all channels on the same transponder, not other transponders.
 
What's the use of recording several channels at the same time? Are you doing it just for testing? Days are only 24hrs ;-)
Each action takes resources and they're not unlimited in our STBs.
Now the hockey world cup is being played and then two matches are being played at the same time.
That is the reason why I record several channels at the same time.
What is the reason why there are several tuners if I cannot use them at the same time?
Now that I have VU+ duo 4k se with SCR(Unicable/JESS) why not be able to use several tuners at the same time.
My old vu+ duo2 with 4 tuners works perfectly so why shouldn't the latest Vu+ duo 4k se with Openbh work just as well seems strange.
 
Det spelar ingen roll om du skannar enligt fördefinierade inställningar (som redan finns i din satellite.xml) eller manuellt ställer in transponderinformationen, förutsatt att satellites.xml är uppdaterad.

Du måste konfigurera dina virtuella mottagare med hjälp av det avancerade mottagare-alternativet, annars kan du bara spela in/visa alla kanaler på samma transponder, inte andra transpondrar.
Alla A-H mottagare har olika användarbandsfrekvenser.
Då ska inga kollisioner uppstå och inspelningen ska fungera för flera kanaler samtidigt.
 
Because your old VU+ Duo 2, like my Duo 2, has mulitple, physical, tuners, with separate cables, from the LNB, or multiple LNB's, going to them.
The 4K receivers, with SCR LNB, has one cable, but can be setup to use multiple "Virtual Tuners", but these have to be setup in your tuner configuration, where you assign different values, to each Virtual Tuner, allowing you to record several transponders, I think you can record 8 different programs, at once.
 
It doesn't matter if you scan as predefined, (Already listed, in your satellite.xml), or manually set the transponder details, providing the satellites.xml is upto date.

You need to set up your virtual tuners, using the advanced tuner option, otherwise you can only record/view all channels on the same transponder, not other transponders.
All tuners A-H have different userband frequencies.
Then no collisions should occur and recording should work for several channels at the same time.
 
Have you tested your configuration, recoding several FTA, Free To Air, channels, on different transponders?
 
Because your old VU+ Duo 2, like my Duo 2, has mulitple, physical, tuners, with separate cables, from the LNB, or multiple LNB's, going to them.
The 4K receivers, with SCR LNB, has one cable, but can be setup to use multiple "Virtual Tuners", but these have to be setup in your tuner configuration, where you assign different values, to each Virtual Tuner, allowing you to record several transponders, I think you can record 8 different programs, at once.
That is how I did it.
 
Have you tested your configuration, recoding several FTA, Free To Air, channels, on different transponders?
No.
No channels are , Free To Air.
The dish is aimed at 0.8W and uses Allente as a distributor.
Now the Vu+ is equipped with two physical tuners so I will test with a splitter so I can use A and B as separate tuners.
 
Very important!
There are reported issues with OpenBH and SCR (Unicable) compatibility on VU+ Duo 4K SE, especially in versions from OpenBH 4.2.022 and later.
Users have noticed that when a recording is started on a Universal LNB (e.g. LNB2 or LNB3) while the same tuner is used to watch a channel via SCR (e.g. LNB1), the recording does not work correctly.
The recording appears to be in progress but is only playable up to the moment the channel was changed. T
his issue has not occurred in previous versions such as OpenBH 4.1 or earlier.

Has this been fixed in version OpenBh 5.5.1.001 and later?
 
Back
Top