How to flash PULSe 4K recovery zip.

[Ev0]

Before you can use the Flash Online option from the recovery menu on the PULSe 4K you will need to flash the OpenBh 5.0.x_recovery_emmc.zip

To do this download the OpenBh recovery file from the downloads section and then extract the zip file to the root of your usb stick.

Then power off your PULSe 4K, and insert the usb (front or rear port it does not matter), then press and hold the reset button next to the tuners on the rear panel, and keep holding it when you power on the box again.

You will see the Red light on the front panel, power on, and then flash (you can release the reset button once the red light starts to flash).

When it stops flashing, the recovery flash is complete and your box will reboot.

You can then boot into the recovery and use the Online Flash option.

 

[osmizza]

After flashing OpenBH recovery the screen I attach appears and the display shows the word "boot" and everything is blocked.
By accessing the recovery mode (holding down the power button on the remote control and the button on the back of the decoder, I see the menu but I can't choose any option.
Before flashing openbh recovery, openatv 7.5 was working (online install). I decided to flash openbh recovery because local install didn't work for me (invalid image!)
Any help appreciated

 

[osmizza]

Sorry, my box is AX HD61 4k...
What an idiot!