how to install openBh image into V+ Solo SE v2?

tarcos

New member
hello friends i have decoder V+ solo SE v2 with blackhole image but i would try OpenBh image. Is there a guide for install it? thanks to all for answer
 
Exactly the same way you installed Black Hole.
Download the correct openBh version, for your receiver.
Use winzip, 7-zip, winrar, or other program, to open the file.
Copy the vuplus folder, to your PC desktop.
Format your USB drive, to FAT 32.
Install the vuplus folder, onto your USB stick.
Code:
https://images.openbh.net/?b=5.1%2Fvuplus%2Fvusolose

Turn off your receiver, using the switch, at the rear.

Insert the USB Pen Drive into the USB socket on the back.

Power on Vu+ Solo SE

The white circular ring on the left side of the front panel will blink a few times then begin pulsing.

The pulsing indicates it's flashing the image.

Once the image has successfully flashed the pulsing will stop and change to blinking on and off.

When the white circular ring is blinking on and off it's now safe to power off with the switch on the back and remove the USB Pen Drive.

Power on again to reboot the receiver, and follow the installation guide.
 
Back
Top