openbh-5.5.1.014.release
- Thread starter ml54
- Start date
zeberil
Donating Member
In which box? Here I only use multiboot on Octagon and it"s working. Well, this after the "new" update...
gerolamo
Active member
But look, I tried several times: typing the IP address and the PW (which I clearly know) if the decoder is stuck on "starting enigma2" it does not connect... This with Putty (I don't know any other methods)
zeberil
Donating Member
You don"t disappoint me... if you can"t, apparently, you must be the only one...
So for big diseases big medicines, flash!
gerolamo
Active member
Your word against mine... except that I physically performed the maneuvers on my Vusolo4k decoders and I know what I'm talking about.And excuse me, I'm not waiting for you to tell me to flash the image again.Moreover, where I had the last freezing problem on Starting Enigma 2, on my Vusolo4k2 box, I solved it with the USB stick with the "recovery" text file installed.I repeat for the last time: with the Putty tool, there is no way to connect a PC to the blocked decoder.
I used windows telnet on Openatv with the same problem and all is ok
gerolamo
Active member
I've never used Windows Telnet and I don't know where to start.I also use Obh image in my decoder.
zeberil
Donating Member
Look, do what you want.... For my part, you are "introduced"!
You look like a little boy upset because he can"t use the toy! It has already been explained by several members how to do it, only then is that your "toys" are different and it is not possible.... and if you are already of some age, be careful, do not get angry...
No, it seems someone updated something that should not have been updated as it breaks the online update.
Your only options are to update via telnet
Code:
opkg update && opkg upgradeNothing else we can do to fix the issue, and it will be the same with all images from all teams.
NotLikeSomeone
Active member
Unfortunately, I hadn't read this thread befor trying the update and now it's not possible even the STARTUP_RECOVERY. Is there a way to start without loosing all the slots?
Again, it appears a big lack of this multiboot (otherwise far more better than the old OpenMultiboot plugin) the chance of launching moltiboot at the startup, so to choose another image and also to manually transfer a backup to the slot by FTP.
Again, it appears a big lack of this multiboot (otherwise far more better than the old OpenMultiboot plugin) the chance of launching moltiboot at the startup, so to choose another image and also to manually transfer a backup to the slot by FTP.
gerolamo
Active member
This is my experience.Requirements:1. If you have a VuPlus box2. If you have the Obh image on this box3. If you have implemented the new multiboot on your box with Obh 5.24. If you have implemented the automatic daily or weekly BKK on your box's HDI obviously have all of these conditionsAt this point, if your box is stuck on "starting enigma2," proceed as follows:1. Prepare a USB stick with a STARTUP_RECOVERY text file at the root.2. Insert the stick into the front USB port3. Turn off the decoder from the back with the switch (hard reset)5. Turn the decoder back on from the back and it will start on Obh 5.016. Menu/backup management/full image backup7. Select the backup you want to restore8. Enter9. Select the slot where you want to install the backup10. Press OK and you're done...
scafroglia93
New member
thanks for the tips
Slow RCU gymmastics in general.
Br.