OpenBH5.3.007_OctagonSF8008_stuckAtBootAfterUpdate

S

SuperGlud

Active member
My Octagon SF8008 on OpenBH5.3.007

Did system update via menu from 5.3.006 to 5.3.007.

Stuck at boot

Gear wheel is running in top left corner.

Display is showing 0049

Also Tried :
init 4 && opkg update && opkg upgrade && init 6 ( to 5.3.008 )

No webIf.
Background jobs are running.
Ftp/telnet to SF8008 are ok.

Best regards
 
B.D.

B.D.

Active member
It happened the same to me when I updated to .007, boot stuck and nothing to do, but rebooting first to another image and going back to the .007 it loaded without any problem anymore. I don't know if booting to another image has been enough to fix the inizialization but it worked for me.
 
S

SuperGlud

Active member
B.D. said:
It happened the same to me when I updated to .007, boot stuck and nothing to do, but rebooting first to another image and going back to the .007 it loaded without any problem anymore. I don't know if booting to another image has been enough to fix the inizialization but it worked for me.
Click to expand...
Thx for the info.
I am not running any kind of multiboot setup.
My OpenBH is installed the classic way (only existing image).
So i cannot try that.

Best regards
 
B.D.

B.D.

Active member
The Octagon SF8008 has a default 4 slots multiboot, I supposed you had at least the Define image it comes with on slot 2.
 
S

SuperGlud

Active member
Ev0 said:
Can only assume YOU have installed something that it doesn't like.

NO issue here updating my sf8008 to 008
Click to expand...
On BH5.3.000 I installed
1. "MX Slimline" skin.
2. enigma2-plugin-extensions-opkg-tools_1.4_all.ipk
and did online updates ok up to BH5.3.006.

Best regards.
 
Ev0

Ev0

Admin
Staff member
Administrator
SuperGlud said:
On BH5.3.000 I installed
1. "MX Slimline" skin.
2. enigma2-plugin-extensions-opkg-tools_1.4_all.ipk
and did online updates ok up to BH5.3.006.

Best regards.
Click to expand...
5.3.000 was not a release image.

Suggest you reflash.
 
S

SuperGlud

Active member
Is it not possible to run some debug/telemetry script to find out why it stops at 0049 ?
As FTP and telnet are working ok.
 
Ev0

Ev0

Admin
Staff member
Administrator
In Telnet, init 2 then enigma2

Hopefully it will tell you the issue
 
Ev0

Ev0

Admin
Staff member
Administrator
You need to highlight all the text and then copy and paste it into a txt document.
 
H

Huevos

Vix Developer
VIP
Harddisk.py, line 722:
mounts = listdir(mountEntry)

That is a python built in function. Nothing has changed there in an update.

OSError [Errno 74] Bad message: '/media/hdd'

That most likely means the disk is corrupt.

If you really believe this is due to an update, go back to the previous version and retry.
 
You must log in or register to reply here.
Top