A
aa7590
a week ago i cant get signals from both tunner of vu+solo2 now tell me how to fix this issuse
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
M
Mick12334
We'll need a lot more information.
Do you have a motorized, or fixed, dish system?
How have you got the tuners configured?
Have you checked the cable connections?
Could it be the LNB that has failed?
Can you try your receiver on a different dish/LNB set up?
Do you have a motorized, or fixed, dish system?
How have you got the tuners configured?
Have you checked the cable connections?
Could it be the LNB that has failed?
Can you try your receiver on a different dish/LNB set up?
A
aa7590
fixed dish all cables ok all lnbs ok but last week get no signals from both tunner how to fix this issue note image is black hole 2.1.7
M
Mick12334
If you've just loaded a new image, like Black hole 2.1.7, you need to set up the tuners, and load a channel list.
Go into the Menu, Setup, Service Searching and set the tuners to the satellite you're dish is pointed at.
Go into the Menu, Setup, Service Searching and set the tuners to the satellite you're dish is pointed at.
A
aa7590
all things were fixed last weak all channales gone i check all cables and lnb ls they r all ok dish is a fixed now tell how to fix this issue
S
skytel
how have you checked dish is aligned ok? have you used a sat meter?
M
Mick12334
Have you been into the menu and checked your tuner configurations?
You need to identify the problem, either by checking your VU+ Solo 2 ona nother dish, or checking another receiver on your dish.
Without knowing how your dish is set up, and what happened, no one can help, all we are doing is guessing.
Why did everything have to be fixed, last week? Is this a new installation?
try contacting whoever fixed it up, for you.
You need to identify the problem, either by checking your VU+ Solo 2 ona nother dish, or checking another receiver on your dish.
Without knowing how your dish is set up, and what happened, no one can help, all we are doing is guessing.
Why did everything have to be fixed, last week? Is this a new installation?
try contacting whoever fixed it up, for you.
A
aa7590
on other receiver channels work ok problem is that on vu+solo2 when i search with same config of lnbs no channels search now what to do tell
M
Mick12334
What other receivers?
The VU+ is a Linux based receiver and the tuners need to be configured, were these other receivers similar?
It might be better if you can get a friend, or installer, who is familiar with the VU+ receiver, or other Linux based receivers, as we aren't getting a lot of useful information, from you, probably due to a language barrier.
The VU+ is a Linux based receiver and the tuners need to be configured, were these other receivers similar?
It might be better if you can get a friend, or installer, who is familiar with the VU+ receiver, or other Linux based receivers, as we aren't getting a lot of useful information, from you, probably due to a language barrier.
A
aa7590
yes i try on spark 2020 hd also its i all ok it