Uclan 4k Pro without online image download?

P

picciriddu

Member
krzychuuu80 said:
I want to have the image in the memory of the tuner. I tried with two installation files and none of them installed
Click to expand...
The same thing happens to me too! I try to install the openbh 5.3 image from USB on the free startup3! it tells me upload completed| but startup3 remains empty! if instead I try with other images it installs them regularly.
 
P

picciriddu

Member
this is the image I wanted to install from USB in slot 3 in multiboot
openbh-5.3.014.release-ustym4kpro-151e03b7_mmc.zip
 
P

picciriddu

Member
Mick12334 said:
You have to find out how to use multiboot, on OpenATV.
Click to expand...
I don't understand what multiboot has to do with openatv! in addition to having the openatv on flash memory I also have openspa on slot 2 and opendroid on slot 4! the problem is that it doesn't install openbh on slot 3 which is empty. starts the installation without loading anything
 
P

picciriddu

Member
this is the sequence when I try to install the openbh image
 

Attachments

  • IMG_20240101_220222.jpg
    IMG_20240101_220222.jpg
    2.3 MB · Views: 8
  • IMG_20240101_220246.jpg
    IMG_20240101_220246.jpg
    2.3 MB · Views: 8
  • IMG_20240101_220251.jpg
    IMG_20240101_220251.jpg
    2.9 MB · Views: 8
  • IMG_20240101_220321.jpg
    IMG_20240101_220321.jpg
    2.4 MB · Views: 7
  • IMG_20240101_220339.jpg
    IMG_20240101_220339.jpg
    2.3 MB · Views: 7
  • IMG_20240101_220351.jpg
    IMG_20240101_220351.jpg
    2.4 MB · Views: 8
B.D.

B.D.

Active member
On OpenATV Multiboot Manager does it show the slot 3 as Empty like in this picture?


01-01-2024 22-49-30.jpg
 
B.D.

B.D.

Active member
Have you tried to download the firmware file again? The one you have could be corrupted and also it might have been updated since then.
 
B.D.

B.D.

Active member
What's your decoder? Once I had a similar problem but I had erroneusly downloaded the wrong image, one other time I had to rename the image file. It's wierd I know but sometimes it happens.
 
B.D.

B.D.

Active member
AS far as I know it's very similar to the Octagon, should have the same hardware and features, just a different brand.
I don't know, I think you should wait for the coders to help you.
Last thing you could do in my opinion is to check the USB stick you are using for eventual errors or use a different one.
 
P

picciriddu

Member
B.D. said:
AS far as I know it's very similar to the Octagon, should have the same hardware and features, just a different brand.
I don't know, I think you should wait for the coders to help you.
Last thing you could do in my opinion is to check the USB stick you are using for eventual errors or use a different one.
Click to expand...
It is very similar to Octagon SF8008! some time ago I also uploaded an image of the octagon by renaming the file! The installation was successful, the only problem was that it didn't recognize the remote control. As for the USB stick, I'm sure the problem depends on that as if I load other images like pure2 6.5 or openfix 5.6 or Hyperion 8 it installs them perfectly.
 
A

andre71

Member
It happened to me too. When I installed the 5.3.014 recovery in slot 1 it didn't install openpli 8.3 in slot 2. Probably some images installed in recovery mode then have problems on the free slots. I solved it by putting openpli 8.3 in slot 1 and BH in slot 2. In my opinion you should make backups of the installed images and put them back with openpli as recovery, you shouldn't have any problems
 
P

picciriddu

Member
andre71 said:
It happened to me too. When I installed the 5.3.014 recovery in slot 1 it didn't install openpli 8.3 in slot 2. Probably some images installed in recovery mode then have problems on the free slots. I solved it by putting openpli 8.3 in slot 1 and BH in slot 2. In my opinion you should make backups of the installed images and put them back with openpli as recovery, you shouldn't have any problems
Click to expand...
Yes! If I do the procedure by downloading images online, where does it install in the flash memory?
However, if I try to install other images from USB, it loads easily! the problem is only for some images! I will try to follow your advice. thanks for the support
 
You must log in or register to reply here.
Top