Vu+ Zero v2 firmware 5.5.1 vs 5.6

L

live4ever

Member
On the Vu+ Zero v2, since versions 5.6, I've only had problems. I install Astra-SM for Abertis DTT and one or two IPTV links, and I have a 256GB SSD for movies or series.
Initially, everything was fine, but the problem is that when I need to restart Enigma2, it gets stuck in a loop and doesn't go any further, requiring me to reinstall the firmware.
This time I installed 5.5.1, let's see if everything goes well. It's been a week and everything is fine.

I hope they review versions 5.6, as I like to always have the latest update.

Regards
 
OBH 5.6 Was released to the public some 6 months ago. It is doubtful the problem is in the image as they are tested before release, and somebody else would have surely complained about a looping enigma2 restart.

Install the 5.6 image into the receiver and Do Not allow channel lists or anything else to restore. Restart enigma2 right after the install and see if it loops. I bet it does not.
 
el bandido said:
OBH 5.6 Was released to the public some 6 months ago. It is doubtful the problem is in the image as they are tested before release, and somebody else would have surely complained about a looping enigma2 restart.

Install the 5.6 image into the receiver and Do Not allow channel lists or anything else to restore. Restart enigma2 right after the install and see if it loops. I bet it does not.
Click to expand...
I really like Open BH ever since I got VU+ Zero and then v2.
I've tried several things to remove what's wrong, and I realize it only works well if I have a channel list; if I add Xstreamity and some other plugin, it doesn't work very well anymore.
This means it's not the fault of version 5.6, it's what's added.
Regards
 
This problem is probably fixable, but you will need to pinpoint the problem. Add Xstreamity and some other plugin that surely has a name back into a freshly installed image one at a time until the bootloop occurs. Restart the receiver after adding each plugin as a test. If possible, Connect to the receiver using Putty or telnet (terminal). Post the output when the receiver bootloops as the terminal will usually show the exact cause of the problem.
 
el bandido said:
This problem is probably fixable, but you will need to pinpoint the problem. Add Xstreamity and some other plugin that surely has a name back into a freshly installed image one at a time until the bootloop occurs. Restart the receiver after adding each plugin as a test. If possible, Connect to the receiver using Putty or telnet (terminal). Post the output when the receiver bootloops as the terminal will usually show the exact cause of the problem.
Click to expand...
If you have xstreamity and astra-sm (Abertis DTT) it works fine, but if you add Bouquet_Maker_Xtream-master (iptv link bouquet creator) it won't hold up anymore.
 
You must log in or register to reply here.
Back
Top