Impossible to Mount NAS
- Thread starter hall9000
- Start date
As I told you in the vuplus-community forum, it's surely not an overall problem, as I have, for instance, no problem at using my two NAS devices with 5.0, a Synology and also a WDMycloud.
So, maybe your problem has to be searched either in your NAS OS or in the protocol used. Maybe, 5.0 is more restrictive about old protocols.
For instance, I have SMB2 as minimum protocol and SMB3 as maximum.
But, unfortunately, there are so many parameters in NAS devices that it's impossible to list them all.
So, maybe your problem has to be searched either in your NAS OS or in the protocol used. Maybe, 5.0 is more restrictive about old protocols.
For instance, I have SMB2 as minimum protocol and SMB3 as maximum.
But, unfortunately, there are so many parameters in NAS devices that it's impossible to list them all.
hall9000
Member
Good Morning 
My question is only for administrators and programmers.
Find a way to re-enable SMBv1
Would it be possible to do like in windows where you can enable SMB 1.0 / CIFS file sharing support?
Through a script or (too good) with a plugin?
Thank you
I wish everyone Happy Holidays and Merry Christmas
Hall
My question is only for administrators and programmers.
Find a way to re-enable SMBv1
Would it be possible to do like in windows where you can enable SMB 1.0 / CIFS file sharing support?
Through a script or (too good) with a plugin?
Thank you
I wish everyone Happy Holidays and Merry Christmas
Hall
But, see that my theory it was caused by an old protocol issue was right? 
Are you sure there isn't a new version of your NAS OS to enable more recent and safe protocols? My two NAS devices released new OS versions in order to achieve this safety and have up to SMB3.
Instead of trying to force OBH to go back, maybe is easier to go forward with this specific NAS, if it does not have SMB2. It seems strange it hasn't, though.
Are you sure there isn't a new version of your NAS OS to enable more recent and safe protocols? My two NAS devices released new OS versions in order to achieve this safety and have up to SMB3.Instead of trying to force OBH to go back, maybe is easier to go forward with this specific NAS, if it does not have SMB2. It seems strange it hasn't, though.
But, see that my theory it was caused by an old protocol issue was right?
Instead of trying to force OBH to go back, maybe is easier to go forward with this specific NAS, if it does not have SMB2. It seems strange it hasn't, though.
as far, as i know nfs is more suitable for linux system, synology - is a linux-based system. try nfs. it must be quicker than smb
hall9000
Member
Hello
I have a NAS Zyxtel NSA 325S V2 from 2012 when most people didn't know what it was.......
Now unfortunately the technology is proceeding fast and my NAS does not receive updates.
I have looked at the site and the forums but it seems that it cannot switch to SMB2
Following is the information for SMB version supported for Zyxel NAS:
SMB v1: NSA series, NSA325 v2 and previous model
SMB v2: NAS series, NAS326, NAS520, NAS540 and NAS542.
The home pc with win 10 see the NAS, Ipad also, smarthpone and my VUDuo2 with other images that I have in multiboot...
I was asking administrators for help to use OBH image what could I do ...
even editing the image and taking copy and paste parts of OBH with old SMB.
Thanks
Hall
I have a NAS Zyxtel NSA 325S V2 from 2012 when most people didn't know what it was.......
Now unfortunately the technology is proceeding fast and my NAS does not receive updates.
I have looked at the site and the forums but it seems that it cannot switch to SMB2
Following is the information for SMB version supported for Zyxel NAS:
SMB v1: NSA series, NSA325 v2 and previous model
SMB v2: NAS series, NAS326, NAS520, NAS540 and NAS542.
The home pc with win 10 see the NAS, Ipad also, smarthpone and my VUDuo2 with other images that I have in multiboot...
I was asking administrators for help to use OBH image what could I do ...
even editing the image and taking copy and paste parts of OBH with old SMB.
Thanks
Hall
hall9000
Member
Good morning
I'm here to ask again for help to come up with something to show my NAS to the new OBH 5.0 image
I ask for help from the programmers of this image (AlexWilMac has already expressed his opinion) to give me some indications to restore that portion of the image.
Or to show my NAS in another way to the image.
Thank you very much from now on who will be of help to me
Hall
I'm here to ask again for help to come up with something to show my NAS to the new OBH 5.0 image
I ask for help from the programmers of this image (AlexWilMac has already expressed his opinion) to give me some indications to restore that portion of the image.
Or to show my NAS in another way to the image.
Thank you very much from now on who will be of help to me
Hall
hall9000
Member
Good morning
In the mount editor of a Polish image I found the possibility to choose the version of samba SMB / CIFS in which to connect the decoder to the line.
Possibility extended from samba SMB 1.0 / CIFS to 2.1 up to 3
I kindly ask to administrators and programmers if it were possible to extend this possibility to this beautiful OBH image as well.
I guess you don't have much time to follow up on all the inquiries that come to you...
In this case I ask then where I can find this part to change in the image, and I will do it at my own risk
Best regards
Hall
In the mount editor of a Polish image I found the possibility to choose the version of samba SMB / CIFS in which to connect the decoder to the line.
Possibility extended from samba SMB 1.0 / CIFS to 2.1 up to 3
I kindly ask to administrators and programmers if it were possible to extend this possibility to this beautiful OBH image as well.
I guess you don't have much time to follow up on all the inquiries that come to you...
In this case I ask then where I can find this part to change in the image, and I will do it at my own risk
Best regards
Hall
Well add it then... Or maybe it is in global.conf. But anyway you need it.
hall9000
Member
Good Morning
My question is only for administrators and programmers.
Find a way to re-enable SMBv1
Would it be possible to do like in windows where you can enable SMB 1.0 / CIFS file sharing support?
Through a script or (too good) with a plugin?
Thank you
I wish everyone Happy Holidays and Merry Christmas
Hall
Many Thanks to amministrators and programmers
In the last release I found the change to the mount (by default it was 2.0 I changed it to 1.0) and now everything works!
Just a note ... Wouldn't it be better to notify you via post when you make significant changes?
Thanks
Hall
..
