Hi everyone!
I have a VU + ultimo that I am trying to flash to a new software with using a USB stick. I have downloaded version 5.3 here using the download links attached in the forum. After having downloaded this version I have followed all the steps described on how to flash my VU + ultimo properly. When I plug the usb stick into my usb port on the vu + ultimo and turn the power switch back to on, nothing seems to be happening at all. Everything just starts up as normal and it does not detect any USB stick which I have already put inside the USB port. I can also add that I have tried 2 or 3 different types of USB drives which means it is really unlikely that something is wrong with my USB drives, and I have also tried the same procedure on another VU + ultimo and it seems to be pretty much the same issue when I try to boot the USB drive or to make it discover the software that should be found on the USB drive. My question for you is if any of you could consider my issue and hopefully give me a concrete advice or solution regarding my issue on flashing my vu + ultimo to my chosen firmware which I earlier said is the 5.3 version. In advance, Thank you for any answer regarding this. I would really be appreciating if someone could solve my problem!
I have a VU + ultimo that I am trying to flash to a new software with using a USB stick. I have downloaded version 5.3 here using the download links attached in the forum. After having downloaded this version I have followed all the steps described on how to flash my VU + ultimo properly. When I plug the usb stick into my usb port on the vu + ultimo and turn the power switch back to on, nothing seems to be happening at all. Everything just starts up as normal and it does not detect any USB stick which I have already put inside the USB port. I can also add that I have tried 2 or 3 different types of USB drives which means it is really unlikely that something is wrong with my USB drives, and I have also tried the same procedure on another VU + ultimo and it seems to be pretty much the same issue when I try to boot the USB drive or to make it discover the software that should be found on the USB drive. My question for you is if any of you could consider my issue and hopefully give me a concrete advice or solution regarding my issue on flashing my vu + ultimo to my chosen firmware which I earlier said is the 5.3 version. In advance, Thank you for any answer regarding this. I would really be appreciating if someone could solve my problem!