OpenBh 5.3 image for the Qviart Dual 4K feedback.

stazeb said:
Please add possibly to switching to recovery multiboot menu.
Thanks
Click to expand...
Have you tried turning the dual off at the rear and then turn back on and when you see the boot message press the ok button on the remote rapidly keep doing this and it should then change the screen to put the box into recovery mode.
 
kegnkiwi said:
Have you tried turning the dual off at the rear and then turn back on and when you see the boot message press the ok button on the remote rapidly keep doing this and it should then change the screen to put the box into recovery mode.
Click to expand...
This is the recovery menu when I had blackhole in slot one
 

Attachments

  • IMG_20230820_080020.jpg
    IMG_20230820_080020.jpg
    3.5 MB · Views: 20
HI
the image works perfectly
only that there is a problem with the mute button
that doesn't work as it should
pressing the mute key the voice is not there
but when I change the channel it comes again and it doesn't have to be like this
you could let the qviart coders know to fix it
Thank you
 
stazeb said:
After latest update when try to switch to another multiboot image systeem crash.
Menu -> Standby & Restart -> MultiBoot Image Selector
Click to expand...
Others have reported the same crash on different boxes.

But I can't get it to crash on any box I have tried, including the dual.

What are the exact steps you are using to get it to crash ?
 
I have OpenPli 9.0 in slot 1 and OpenBH 5.3 in slot 2.
In version before I had no problem to switch from OpenBH 5.3 in slot 2 to OpenPli 9.0 in slot 1.
After update I have each time crashes.
I’m using menu options for that:
Menu -> Standby & Restart -> MultiBoot Image Selector
When I select ‘MultiBoot Image Selector’ I see that image is looking for installed images and after 2-3 seconds I have crash.
For more info look to the log file.
Maybe with combination with Skin?
 
I tried with default skin, the others with the same crash are also using default skin, so that is not the cause.
 
Maybe combination in different slot than 1?
I have also SF8008 with OpenBH 5.3 in slot 1 and OpenPli 9.0 in slot 2 and I have no problems with switching between this slots.
 
stazeb said:
Maybe combination in different slot than 1?
I have also SF8008 with OpenBH 5.3 in slot 1 and OpenPli 9.0 in slot 2 and I have no problems with switching between this slots.
Click to expand...
I now have obh in slot 1,2 and 4 on the sf8008
 
How many images do you have on your dual ?

I need a debug log from when it crashes please.
 
Thank You! Qviart Dual 4K no problem any more. I changed the Multiboot.pyc file in /usr/lib/enigma2/python/Tools/ and the receiver now enters mode Multiboot normally without crashing.
 
You must log in or register to reply here.
Back
Top