The TV picture freezes when another channel starts recording

Akita

Akita

Donating Member
The TV picture freezes when another channel starts recording.
After the time counts down in the picture, the picture comes back.
What is wrong?
Is the receiver A and B set up incorrectly?
 
Setting: Tuner miscellaneous
In auto it works if both channels are on the same muf.
Chose B as recording and now it works even for different muf.
But then it doesn't work for recording on the same muf.
Now I don't know which setting to choose?

Is there anyone who can show me what choices I should make so that recording doesn't interfere with when I watch a channel.
 
Could the lack of responses be because I didn't write that it applies to VU+duo 4K Se with OpenBh 5.3?
 
If you post some screenshots of how you have setup the tuners it might help you get some replies.
 
Here a little more about recording.
If I record multiple channels, it is selected according to the following tuner.
1st is recorded on A
2nd is recorded on C
3rd is recorded on D
4th is recorded on B
Shouldn't the 2nd recording select B
And sometimes ABCD
 
You need to show the tuner settings (the next page).

What LNB are you using, how many connections from the lnb to the receiver ?
 
This page
 

Attachments

  • 1_0_19_5122_841_2_11A0000_0_0_0_20250121130945.jpg
    1_0_19_5122_841_2_11A0000_0_0_0_20250121130945.jpg
    284 KB · Views: 9
Ev0 said:
This page
Click to expand...
I didn't know that I had to choose Advanced.
I thought I could have the same settings as on VU+ duo2.
Could this be the correct settings?
Should tuner B be set to the same as A?
 

Attachments

  • Tuner3.jpg
    Tuner3.jpg
    966.1 KB · Views: 4
You don't need to choose advanced.

I just need to know what you have set in that menu for each tuner
 
Also need to know:

What LNB are you using, how many connections from the lnb to the receiver ?
 
What LNB are you using, how many connections from the lnb to the receiver ?
 
So setup tuner B the exact same as tuner A.

You have a universal quad lnb so each tuner needs a feed from the lnb and should be configured as such.
 
Ev0 said:
So setup tuner B the exact same as tuner A.

You have a universal quad lnb so each tuner needs a feed from the lnb and should be configured as such.
Click to expand...
A and B set as single.
Recording on the same muf.
The TV picture gets interference after the recording starts.
If I switch to another channel and back, the TV picture is OK.
Using Tuner A in both cases.

If I record on another muf, interference in the TV picture but stops after a while.
TV picture on tuner A and recording from tuner B.

Seems to be difficult to get it to work well.
No errors in the recordings.

Maybe try Advanced?
There I can set the Type of LNB.
 
If you have actually interference, then it sounds like you need new coax cable
 
You must log in or register to reply here.
Back
Top