Unicable Problem OpenBh 5.2.007

[Onkel]

My satellite configuration
2 LNB Astra/Hotdirb
multiswitch 9/8
Spaun SUS 21 FX (src 1076-1178)

I have problems when I can't record on one satellite not the other
use.

I've been using this configuration for ages and never had any problems.
if i use another image not obh everything works.

I load my file setting.

Thanks

 

[Ev0]

I don't use a mulitswitch, so not 100% sure this is your issue.

But you have set unicable matrix (switch) on lnb 1, but unicable Jess on lnb 2.

Set them both the same (i'm assuming switch / matrix is correct for your setup) and then see if the problem is resolved.

 

[Onkel]

Thanks for your answer.
I've tried everything.

As has already been written above, with this configuration and other images, recording from another satellite works at the same time as what others are watching.

For example, I'm recording something on Hotbird and I can watch a channelin Hotbird, but I can't watch a channel from Astra.

I've been using blackhole for 10 years and openblackhole since openblackhole 4 I've had these problems.

Thanks

 

[Ev0]

Maybe someone else that uses Matrix switch can help.

But to me, it seems wrong to use the same positions and userbands for both lnb's

 

[Onkel]

spaun SUS have 2 frequencies 1076 and 1178

Tuner A use 1178 LNB1 is position 1
LNB2 is position 2

Tuner B use 1076
LNB1 position 1
LNB2 position 2

if I use preferred tuner A or B everything works but not Work for recording


When recording from a channel and changing to another satellite, the message "No tuner available"

 

[Ev0]

Can you post screenshots of the tuner setup, from an image you do not have this issue with ?

 

[Onkel]

i will install it and send you pictures.

Thanks for Help

 

[Onkel]

Hello Mister Evo i send you screenshots from not ObH image in this picture i have Unicable-matrix .

I can record and see something else no matter which satellite I turn on

in ObH no have this option

Thanks

 

[Ev0]

Hello Mister Evo i send you screenshots from not ObH image in this picture i have Unicable-matrix .

I can record and see something else no matter which satellite I turn on

in ObH no have this option

Thanks

As I said above, you are using a combination of Matrix and Jess with openbh.

In openatv you have used Matrix on both tuners and LNB settings.

 

[Onkel]

I can't select a UnicableMatrix with ObH.

If you would like to tell me which settings I should make...

 

[Ev0]

I can't select a UnicableMatrix with ObH.

If you would like to tell me which settings I should make...

The setting you have used here:

 

[Onkel]

yes!!!!
With these settings, tuner A or B works without recording, both of them, but if I record something, it doesn't work

 

[Onkel]

Hello Mister Evo today have time for test, have installed Openblackhole 4.4 and have setting tuner same image 5.2
i can recording channel to hotbird and can see channel to astra no have problem !!!!

Only problem image 5.2

 

[Ev0]

I don't know what you have done, but everytime I look at the pictures of your tuners settings for OpenBh 5.2 they are different to what you show me you have in other images.

I suggest, do a factory reset (or reflash the box), then set the tuners up again fresh.

 

[Onkel]

you can see to openblackhole 4.4 have setting sus 21 F my spaun unicable is sus 21 F and with 4.4 image work good recording and can see channel
image 5.2 i set sus 21 F have tuner failed set sus 21 F2 work

but where I've already written can't record and watch what others see at the same time

I've already flashed the box several times.

I don't want to bother you any further with my problem...
I then switched to an ATV, no problems with it.

Thank you for your help and support

 

[Ev0]

you can see to openblackhole 4.4 have setting sus 21 F my spaun unicable is sus 21 F and with 4.4 image work good recording and can see channel
image 5.2 i set sus 21 F have tuner failed set sus 21 F2 work

but where I've already written can't record and watch what others see at the same time

I've already flashed the box several times.

I don't want to bother you any further with my problem...
I then switched to an ATV, no problems with it.

Thank you for your help and support

The problem is not the image, it is that you are using different settings in openbh 5.2, compared to what you used in atv and obh 4.4

If you use the same correct settings in 5.2 then it will work.

 

[Onkel]

I think the problem is Image but Set sus 21 f this work to Image 4.4 Set this to 5.2 tuner failed Set sus 21 f2 have picture astra and hotbird...

 

[Ev0]

I think the problem is Image but Set sus 21 f this work to Image 4.4 Set this to 5.2 tuner failed Set sus 21 f2 have picture astra and hotbird...

I have no idea which lnb you have.

Every screenshot you post, has different lnb options selected, but if it works in openbh 4.4 and atv then it will also work in 5.2 with the correct settings.

As you can see from the list below, there is no SUS 21 F2

        <manufacturer name="Spaun">
            <product name="SUS 21 F" positions="2" scrs="1076,1178"/>
            <product name="SUS 21 FI" positions="2" scrs="1210,1420"/>
            <product name="SUS 4441 F" scrs="1210,1420,1680,2040"/>
            <product name="SUS 5541 F-NFA" scrs="0974,1076,1178,1280"/>
            <product name="SUS 5581 F-NFA" scrs="0974,1076,1178,1280,1382,1484,1586,1688"/>
            <product name="SUS 5581 NF 1x8" scrs="1068,1284,1400,1516,1632,1748,1864,1980"/>
            <product name="SUS 5581 NF 3x3 1" scrs="1068,1284,1400"/>
            <product name="SUS 5581 NF 3x3 2" scrs="1516,1632,1748"/>
            <product name="SUS 5581 NF 3x3 3" scrs="1864,1980,2096"/>
            <product name="SUS 5581 NF Leg 1x8" scrs="0974,1076,1178,1280,1382,1484,1586,1688"/>
            <product name="SUS 5581 NF Leg 3x3 1" scrs="0974,1076,1178"/>
            <product name="SUS 5581 NF Leg 3x3 2" scrs="1280,1382,1484"/>
            <product name="SUS 5581 NF Leg 3x3 3" scrs="1586,1688,1790"/>
            <product name="SUS 5581 NFA Leg 1x8" scrs="0974,1076,1178,1280,1382,1484,1586,1688"/>
            <product name="SUS 5581 NFA Leg 3x3 1" scrs="0974,1076,1178"/>
            <product name="SUS 5581 NFA Leg 3x3 2" scrs="1280,1382,1484"/>
            <product name="SUS 5581 NFA Leg 3x3 3" scrs="1586,1688,1790"/>
            <product name="SUS 41 F" positions="4" format="jess" scrs="1076,1178,1280,1382"/>
            <product name="SUS 41 F2" positions="4" scrs="1076,1178,1280,1382"/>
            <product name="SUS 41 F3" positions="4" format="jess" scrs="1076,1178,1280,1382"/>
            <product name="SUS 9942/8 NF Leg 2x4" positions="2" scrs="1076,1178,1280,1382"/>
        </manufacturer>

If you post your settings file (found in /etc/enigma2) from both your openbh 4.4 image and your 5.2 image then I can try and fix the problem for you.

 

[Onkel]

i have 2 quattro lnb this is connect to 9/16 multiswitch and the spaun sus 21 F is connect to multiswitch this have 10 year and all blackhole an openblackhole 4.4 work.
i will you send the setting in etc/enigma for 4.4 and 5.2
Ok thanky you for Help and sorry a stress you with my Problem.....

 

[Onkel]

Hello Mister Evo i send you Settings

Settings-File 4.4.023 ------> Work
Settings File-5.0.013-------> Work
Settings File-5.1.012-------> Work
Settings File-5.2.007-------> Not Work

image I imported cleanly do not use multiboot

Thanks for Help